Delrin POM Air Nozzle for AEG
With dual internal o-rings and super tight tolerances!
 
Compatible with:
Most M4/G3 : 21.2mm
Most AK / G&G MP5 : 19.7mm
 
Staying true to the EPN nozzle design, these nozzles use a reinforced shaft to allow a much deeper O-ring placement to dramatically reduce wobble.
The nozzle's tip angle and depth are both optimized for bucking lip engagement and sealing.
 
Installation tips:
Our nozzle has an extra chamfer for reinforcement so some hopup may require modification.
To optimize your nozzle to bucking seal, you may need to chamfer by cutting/sanding a 45 degree slope on the inner tip of your hopup.
The nozzles are made like this on purpose and this tiny mod was known to be possibly needed already.