Adds new shooting modes independent for every position on the fire selector (SAFE – SEMI – AUTO)
Three adjustable bursts (range 2 – 20 shots)
It preserves empty magazine detection like the original gun
The rate of fire can be reduced to 40%. It adds breaks between shots to reduce RoF. It gives a fast trigger response even with a very low rate of fire, just like in a real gun
Adjustable strength active braking (can be disabled)
Pre-cocking function for an instant shot on SEMI fire
The delay between shots adds time in which isn’t possible to shoot, it simulates the delay from gun reload or recoil (range 0,1 – 4,0 seconds)
Electronic fuse set the sensitivity for high current detection to avoid any damage if something goes wrong
Low battery indication for 2S – 4S li-pol and 3S – 4S li-fe
Virtual magazine simulates low capacity magazines, it will force the gun to stop shooting when it reaches 0. There can be set warning after shot before empty magazine and how it will be reloaded
On the board are input and output ports for controlling external devices or Leviathan
Statistics screen shows shooting output with cycle timing, motor current consumption, rate of fire and temperatures. It allows you to do fine-tune gearbox upgrade
The application shows the actual battery voltage value. Colour lines indicate battery charge status where green is OK, orange will warn after each shot and red will not allow shooting
User can save multiple settings under profiles
Update function fixes bugs and adds new features to the device
There are three shot counters. Total count every shot during the device lifetime. User counter can be reset by the user anytime. The power-up counter is reset by battery connection
Error log shows errors made during the device life also can be erased by the user
For better security wireless connection can be disabled by the selector switch (can be deactivated)
Leviathan monitors current, voltage and temperature to avoid any damage when something goes wrong.
The motor vibrates and beeps as feedback for the user
Programmed settings are saved in the Leviathan memory immediately after their change, so you can immediately test it and settings aren’t lost when is battery disconnected or lost connection with smartphone
New functions are for free for every user via the online update function
FIRE MODES: Independent for every position on the fire selector (SAFE – SEMI – AUTO)
SAFE: no responding on the trigger pull.
Semi: it fires single shot per trigger pull.
Semi/BurstX: short trigger pull fires single shot, long trigger pull fires burst.
Binary trigger: it fires in single shot when the trigger is pulled and another single shot when is released.
BurstX: gun shoot burst per trigger pull.
BurstX+BurstY: short trigger press fires burstX, long trigger press makes burstX+burstY fire.
BurstX/Full: short trigger press fires burstX, long trigger press makes auto fire.
Full: gun makes auto fire until releasing the trigger.
Virtual reload: pull the trigger to reload the virtual magazine